【資料名稱】：COMPASS GSM Network Optimisation (V2.2)for MPA 7200/7300
【資料作者】：no
【資料日期】：2003
【資料語言】：english
【資料格式】：pdf
【資料目錄和簡介】：
1 PREFACE
1.1 Scope
2 SOFTWARE INSTALLATION
2.1 Software components
2.2 Hardware platform
2.3 Installation procedure
2.4 Starting COMPASS GSM SW
2.5 COMPASS GSM Software Administration
3 INTRODUCTION TO COMPASS GSM SOFTWARE
3.1 Purpose
3.2 COMPASS GSM capabilities
3.3 COMPASS GSM requirements
4 GENERAL FEATURES
4.1 ToolTips
4.2 Sorting and filtering in forms
4.3 Editing fields in forms
4.4 Zooming into statistics
4.5 Closing forms
4.6 Cell names in statistics
4.7 GSM data
4.8 Displaying graphs
5 PROCESSING FILES
5.1 File Format
5.2 Processing a new File
5.3 Generated Reports
5.3.1 File processing report
5.3.2 Cell list
5.3.3 Overall analysis report
5.3.4 SCCP UDT messages report
5.4 Cell names management
5.4.1 Importing Cell Names
5.4.2 Exporting Cell Names
5.5 Thresholds programming
6 BASIC A INTERFACE FEATURES (A-INTERFACE 1)
6.1 Call Management Service Distribution
6.2 Location Updating Distribution
6.3 Handover Request List
6.4 Handover Required List
6.5 Handover Performed List
6.6 Handover Causes per selected pair of source and target cells
6.7 Handover Causes per Cell
6.8 Handover Causes per Cell (Chart)
6.9 Handovers List per Call
6.10 IMSI Count per PLMN
6.11 Called Number Analysis
6.12 Called Number Group Names Definition
6.13 Called Number Group Content Definition
6.14 List of numbers of a selected group
6.15 Called number groups management
6.15.1 Importing Called Number groups
6.15.2 Exporting Called Number groups
6.16 MS Power Class
6.17 Normal Location Updating
6.18 Location Updating Accepted
6.19 Location Updating Reject (Network Failure)
6.20 Location Updating Reject (PLMN or Location area not allowed)
6.21 Traffic channels used
6.22 PCM Allocation Time
6.23 PCM Connection Time
7 ADVANCED A INTERFACE FEATURES (A-INTERFACE 2)
7.1 SDCCH statistics: All Calls
7.2 SDCCH statistics: Mobile Originating Calls
7.3 SDCCH statistics: Mobile Terminated Calls
7.4 SDCCH statistics: Emergency Service
7.5 SDCCH statistics: Location Updating
7.6 SDCCH statistics: Supplementary Services
7.7 SDCCH statistics: SMS Originating
7.8 SDCCH statistics: SMS Terminated
7.9 SDCCH statistics: Call Reestablishment
7.10 TCH statistics: All Calls
7.11 TCH statistics: Connected Calls Only
7.12 Causes of a given Category per Cell
7.13 Handover statistics: Incoming Handovers
7.14 Handover statistics: Outgoing Handovers
7.15 Handover statistics: Intra-cell Handovers
7.16 Handover Causes
7.17 Handovers of Selected Category
7.18 Called Number Analysis by Cause
7.19 A interface Causes per BSS
7.20 Cells with a given Cause
7.21 Communication Phases Classification
7.22 Exporting A Interface Statistics
8 ABIS INTERFACE FEATURES
8.1 Abis General Information
8.1.1 TEI definition
8.1.2 Pseudo-cell identifiers
8.1.3 Exceptions in grouping TRX by cells
8.1.4 Radio channels of TRX
8.1.5 Channels Configuration and Usage
8.2 Measured Neighbours List
8.2.1 Importing Neighbours List
8.3 Interference Bands
8.4 CCCH Load Indication
8.5 RSL Causes
8.6 Abis Handover Statistics
8.7 Abis Handover Causes Statistics
8.8 Handovers per Target Time Slot
8.9 Chart : Count of Measurements versus Timing Advance
8.10 Chart: Averaged Received Levels versus Timing Advance
8.11 Chart: Averaged Received Quality versus Timing Advance
8.12 Chart: MS Power versus Timing Advance
8.13 Chart: Links Balance versus Timing Advance
8.14 Chart: Uplink Quality versus Uplink Level
8.15 Chart: Downlink Quality versus Downlink Level
9 CALL TRACE FEATURES
9.1 A-Interface Selection Filters
9.1.1 A-interface CALL CRITERIA form actions description
9.1.2 A-interface CALLED NUMBER form actions description
9.1.3 A-interface DTMF STRING form actions description
9.1.4 A-interface IMSI form actions description
9.1.5 A-interface HANDOVER CRITERIA form actions description
9.2 MESSAGES AT A-INTERFACE
9.3 DTMF String
9.4 SCCP UDT Messages at A-interface
9.5 Abis-Interface Selection Filters
9.5.1 Abis-interface CALL CRITERIA form actions description
9.5.2 Abis-interface CALLED NUMBER form actions description
9.5.3 Abis-interface HANDOVER CRITERIA form actions description
9.6 Messages at A-interface and Abis-interfaces
9.7 Message Dump
9.8 Information Elements List
9.9 Information Element Values
9.9.1 Information elements available with A-interface messages
9.9.2 Information elements available with Abis-interface messages
9.10 Radio Measurements
9.10.1 Channel Changes List
9.10.2 Measured Neighbour List
9.10.3 DTMF Codes
9.11 CLASSIFYING CASES FROM CALL TRACE
10 CLASSIFICATION OF COMMUNICATION PHASES
10.1 Definition
10.2 Categories
10.3 Call type
10.4 Ending event
10.5 Causes

[ 本帖最后由 laomaoyixin 于 2009-6-4 22:44 編輯 ]