【資料名稱】：HSDPA 和 EUL的配置（configuring hsdpa and eul

【資料作者】：ERIICSSON

【資料日期】：20091215

【資料語言】：英文

【資料格式】：PDF

【資料目錄和簡介】：

愛立信WCDMA HSDPA和EUL的詳細(xì)配置過程！

1 Introduction 1
1.1 Prerequisites 1
2 Main Scenarios 5
2.1 Installing HSDPA and EUL to an RBS 5
2.2 Increasing the HSDPA and EUL Capacity in an RBS 5
2.3 Modifying the HSDPA and EUL Configuration in an RBS 6
3 Licenses and Attributes for HSDPA and EUL 7
3.1 Licenses for HSDPA and EUL 7
3.2 Attributes for HSDPA and EUL 10
3.3 Additional Information for HSDPA and EUL 14
4 Adding or Replacing RAX Boards 22
4.1 Replacing RAX R1 Boards 22
4.2 Adding RAX boards 23
5 Adding TX6HS-0x Boards 24
5.1 Adding TX6HS-0x Boards 24
5.2 Replacing non-HSDPA TX Boards with TX6HS-0x Boards 25
5.3 Replacing TX6HS-0x Boards with TX6HS-0x Boards with
Higher Capacity 25
6 Replacing RFIF Boards 27
7 Configuring the RBS for HSDPA and EUL 28
7.1 Steered Configuration of HSDPA 28
7.2 Automatic Configuration of HSDPA 28
7.3 Configuring HSDPA and EUL Resources on TX6HS-0x
Boards in MO TxDeviceGroup 29
7.4 Configuring Steered HSDPA Processing Resource
Mapping 31
7.5 Configuring HSDPA Features in MO RbsLocalCell 31
7.6 Configuring EUL Features in MO RbsLocalCell 32
7.7 Configuring HSDPA Features in MO NodeBFunction 33
7.8 Configuring EUL Features in MO NodeBFunction 34
8 Preparing the Transport Network for HSDPA
8.1 Replacing the ET-M1 Board with an ET-MC1 Board
Implementing IMA
8.2 Configuring Transport Network Nodes
9 Performing Concluding Routines
9.1 Verifying the New Configuration
9.2 Updating the Site Installation Documentation
9.3 Securing and Leaving the Site
10 Possible TX6-HS Allocations
10.1 Examples Using TX6HS-03 Boards
10.2 Examples Using TX6HS-04 or TX6HS-06 Boards
11 Effects of Changes on RBS Traffic