【資料成文時間】：未知
【語言】：英語
【頁數】：57
【何人（公司）所著】：你知道的話就告訴我，謝謝
【文件格式】：doc
【文件原名】：Commissioning M13 (MSCi,MSS,HLR,CDS)
【摘要或目錄】：
Contents

ContentsIII
List of tablesV
List of figuresVI
Summary of changesVII

Contents

1 Introduction to commissioning MSCi,Transit MSCi, Compact MSCi, HLRi,integrated MSS, MSS, GCS, CDS1
2 Commissioning preparation2
2.1 Installation2
2.2 Devices and tools for inspections and testing2
2.3 Documents needed in testing3
3 Initial inspections at commissioning4
3.1 Inspecting HW material according to the site documents4
3.2 Inspecting jumper settings4
3.3 Inspecting message bus connections5
3.4 Inspecting the power supply8
3.5 Installing the plug-in units in the cartridges8
3.6 Inspecting the peripheral unit9
3.7 Inspecting the message bus address of processor units11
3.8 Inspecting the condition of MB cables and MBIF plug-in units11
3.9 Inspecting the hard disk units12
3.10 Using several CHUs in the MSC14
3.11 Starting up the network element15
3.12 Creating HW configuration19
3.13 CDSU pools21
3.14 Inspecting LAN (Ethernet) switches22
4 Inspecting authority data, software versions and I/O system23
4.1 Opening the first session, verification of the authority data23
4.2 Inspecting software versions25
4.3 Inspecting the I/O devices25
4.4 Inspecting output control26
4.5 Checking and testing backup devices26
4.6 Checking MO91 Magneto Optical disks27
5 Inspecting the maintenance system28
5.1 Checking the supervision system28
5.2 Testing the wired alarms28
5.3 Testing the external alarms31
5.4 Testing fuse fault in supply cable33
6 Inspecting unit diagnostics and working states35
6.1 Inspecting state transitions and diagnostics of the OMU36
6.2 Inspecting state transitions and diagnostics of the CLS37
6.3 Inspecting state transitions and diagnostics of the other duplicated units38
6.4 Inspecting state transitions and diagnostics of N+1 redundant units39
6.5 Inspecting state transitions and diagnostics of the BDCU40
6.7 Inspecting state transitions and diagnostics of the ET, IPET, CDSU, NDSM and NDSD41
6.8 Inspecting state transitions and diagnostics of the MB42
6.9 Inspecting TCP/IP interface connection43
6.10 Testing the spare plug-in units44
6.11 Inspecting the FTRB units44
7 Additional inspections for the clock and synchronization unit45
7.1 Inspecting clock equipment45
7.2 Inspecting synchronisation unit45
7.3 Modifying the Tone Generator Field Programmable (TGFP-A)47
8 Item code and serial number report for Traceability purposes48
9 MB Addresses for MSCi49
11 MB Addresses for Transit MSCi51
12 MB Addresses for HLRi52
13 MB Addresses for Integrated MSS53
14 MB Addresses for MSS54
15 MB Addresses for GCS55
16 MB Addresses for CDS56
17 Spare parts57
17.1 Recommended spare parts57