【資料名稱】：MGw Health Check GuideLine

【資料作者】：eric

【資料日期】：eric

【資料語(yǔ)言】：英文

【資料格式】：DOC

【資料目錄和簡(jiǎn)介】：

1GENERAL2
1.1PURPOSE AND SCOPE2
2PROCEDURE2
2.1PREPARATION BEFORE HEALTH CHECK2
2.1.1SOFTWARE TOOLS2
2.1.2HARDWARE2
2.2MGW HEALTH CHECKLIST2
2.2.1Check SW level2
2.2.2Check status of all Plug-In Units2
2.2.3Check alarm and event with EMAS3
2.2.4Check status of the Message Transfer Part (MTP) links.3
2.2.5Check the status of the Virtual Media Gateways (VMGws) ,TDM termination groups, ATM and the device pools.3
2.2.6Check error info with "te log read"4
Check soft error in every board with command:4
2.2.7Check GPB processor load4
Check soft error in every board with command:4
2.2.8Check GCP error4
2.2.9Check related counters for CH and MESC5
2.2.10Check LM status with " pglist"5
Check soft error in every board with command:5
2.2.11Check board restart info5
Check board restart info with command:5
2.2.12Disk space requirement6
2.2.13Maximum number of CV6
2.2.14Check that only default traces are activated on all Plug-In Units.6