【資料名稱】：CDMA產品培訓案例集

【資料作者】：hiawei

【資料日期】：2010

【資料語言】：中文

【資料格式】：DOC

【資料目錄和簡介】：

1. 某局指配失敗導致不正常拆線..............................................................................................4
2. 數據配置不當導致前轉的話單主叫號碼填寫為TLDN 號碼.............................................4
3. ANM 消息中協調被連號碼長度過長導致接續失敗...........................................................5
4. 某局添加位置區小區信息失敗問題分析..............................................................................6
5. 相鄰 MSCID 表配置錯誤某局局間SIP 硬切換失敗問題分析...........................................6
6. 漫游用戶類型表沒有配置導致?lián)艽虮镜豍STN 號碼不出局..............................................7
7. 虛擬媒體網關號配置錯誤導致新對接A 口電路故障.........................................................9
8. 新關口局入網割接后，本地端局撥打移動12580 無法接續的問題處理..........................9
9. 最大元組數擴容后出現CRC 校驗失敗..............................................................................10
10. 端局原因?qū)е玛P(guān)口局指定中繼撥測錯誤............................................................................11
11. 號首特殊處理表放音失敗問題分析....................................................................................11
12. PPC 漫游用戶無法作主叫...................................................................................................12
13. 對局配置ISUP 電路類型未生效導致電路狀態異常.........................................................12
14. 呼叫未接通對主叫用戶進行了扣費投訴處理....................................................................13
15. 如何實現對861 開頭的PSTN 字冠正常接續而對861 開頭的MDN 字冠進行攔截放音
14
16. BSC 割接后A 口電路恢復慢..............................................................................................15
17. 與 N 友商對接MAP 電路失敗問題....................................................................................15
18. 某局點重疊話單問題...........................................................................................................16
19. 由于被叫號碼屬性配置不當導致話單規整失敗問題........................................................17
20. 雙歸屬倒換中繼電路大量故障............................................................................................17
21. 漫游用戶的ROUTING REQUEST 響應消息發不出去問題的處理.........................................18
22. 承載類型不同導致SCCP 負荷分擔不均問題....................................................................19
23. 由于 SSN 配置不正確導致短消息發送失敗......................................................................19
24. 澳門一卡雙號主叫時出局帶86 問題..................................................................................20
25. 某局在擴展尋呼中的PAGING REQUEST 消息中為何沒有帶LAC .....................................21
26. 鑒權失敗進行SSD 更新導致主叫號碼前加區號問題.......................................................21
27. SIP 協議對接中SESSIONTIMER 協商失敗導致呼叫失敗...................................................22
28. SIP 轉接呼叫失敗問題的處理.............................................................................................23
29. 呼叫源預收號長過大導致短號碼呼叫失敗........................................................................24
30. 因 BSG 單板處理能力不夠?qū)е翲.248 鏈路處于無效態..................................................24
31. 為什么 MSCE 操作日志記錄僅保存兩個多月....................................................................25
32. 協議分發能力配置不同，導致SIP 心跳不一致................................................................26
33. 如何撥測閉塞的A 接口電路...............................................................................................26
34. M3UA 路由名稱是如何修改的...........................................................................................27
35. 用戶短時間連續發起乒乓切換導致切換不成功問題分析................................................28
36. 停機保號用戶撥打10000 不能成功....................................................................................28
CDM案例集文檔密級:
2010-07-09 華為機密，未經許可不得擴散第 3 頁, 共62 頁
37. VDB 單板問題導致位置登記失敗......................................................................................29
38. 41．0 框故障對其他框的影響.............................................................................................29
39. HSC 單板問題導致CSOFTX 單框業務中斷......................................................................30
40. 無應答前轉的時長是如何確定的........................................................................................31
41. 操作日志記錄保存不全問題................................................................................................32
42. 號碼字冠采用正則號碼串方式導致添加被叫號碼不成功................................................33
43. 加小區數據時呼叫源配置錯誤導致基站下用戶主叫提示空號問題................................34
44. 隱含呼叫前轉失敗問題.......................................................................................................34
45. XX 省用戶在MSCE 下短消息通知問題.............................................................................35
46. 如何滿足客戶兩個國際號碼前綴的需求............................................................................36
47. 新關口局入網割接后，本地端局撥打移動12580 無法接續的問題處理........................36
48. 端口模式設置不一致導致關口局話單有2～3 秒時差......................................................37
49. 修改 UMG TC CC 資源配比的方法....................................................................................38
50. OMU 倒換后UMG8900 與M2000 斷連的處理方法.........................................................39
51. 關于 VPU 板加載靜態語音包大小和動態語音數量的限制..............................................39
52. MGW 升級后出現網關MAC 地址沖突告警.....................................................................40
53. M3DE 和M3LKS 配置錯誤導致UMG 無法轉接A 口電路復位消息.............................41
54. 掩碼配置導致鏈路負荷不均................................................................................................42
55. UMG 消息在兩個鏈路集上發送不均問題分析.................................................................42
56. 媒體網關重啟后注冊到MGC 但未上報端點恢復服務.....................................................43
57. 如何快速查詢一次呼叫所占用的TC 資源信息.................................................................44
58. BAM 系統文件損壞告警如何處理.....................................................................................45
59. 如何查詢一塊SPF 扣板配置了多少條鏈路.......................................................................45
60. M3UA 鏈路自動去激活.......................................................................................................46
61. 刪除 IP 網關地址不規范導致UMG8900 網關吊死問題...................................................46
62. 在 UMG8900 配置M3DE 時網絡模式配置成“共享模式”導致A 口無消息...............47
63. MPU 板故障導致M3UA 鏈路閃斷.....................................................................................48
64. 安裝多個版本的LMT 導致性能臺無法創建任務.............................................................49
65. 承載網帶寬不足導致RTP 報文丟失問題...........................................................................49
66. 扣板與底板通信協議錯誤導致SCMU 扣板為故障態.......................................................50
67. M2000 任務拆分機制導致IPQOS 話統創建失敗..............................................................51
68. HLRV9 由于物理庫連接掛死導致DSU 模塊CPU 負荷持續升高的問題.......................52
69. 因“用戶數目”參數設置不合理導致運營商與大量用戶產生話費糾紛........................54
70. 如何通過FTP 定時任務方式將用戶數據備份至指定服務器.............................................55
71. 系統號段添加錯誤導致ADD CAKEY 命令失敗...............................................................56
72. 開戶模版中短消息始發限制如何配置................................................................................57
73. 端局鑒權處理不當導致非法用戶改變HLR 中用戶狀態..................................................57
74. CDMAHLR 鑒權參數設置不合理導致鑒權參數缺失也能鑒權成功..............................58
75. 容災局?jǐn)U容DRU 和DSU 板，主用局還未擴容的情況下增加鑒權數據失敗................59
76. MSCID 配置錯誤（模糊匹配時）導致位置登記失敗......................................................61
77. 配置號段中GT 編號計劃選錯導致不能做被叫................................................................61