【資料名稱】：CDT采集指導書

【資料作者】：HUAWEI

【資料日期】：2010.12

【資料語言】：英文

【資料格式】：DOC

【資料目錄和簡介】：

Notes：
1.Please open the tracing at the same time
2.Please open the tracing before connecting the terminal to collect the initial setup message

1、RNC UE Tracing（please open the inner print of the UE tracing，refers to the appendix）
Step1：


Step 2：

Step 3：


Step 4：;

灌包設置：(AUTO PING)
Ping interval: 1
Packet length: 大于1472，自動變成1472
通過在monitor-connection performance monitoring可以查看測試速率

2、Node B CDT：

Step 1：在RNC上執行MOD UNODEB: NodeBId=XX,nodebtraceswitch=on;


Step 2：Selecting the Trace Method with IMSI and input the IMSI ID of the UE


Step 3：Selecting the message according the graph below






如果不能修改該參數，則需要如下設置：
先打開：
D:\HW LMT\adaptor\clientadaptor\NodeB\******\style\defaultstyle\conf\trace\TraceTask.ini

****** means your NodeB version.

3、RNC Real-time monitor
a. CELL RTWP
b. UE SIR and SIR error
c. UE PCPICH EcNo/RSCP
d. UE dl throughput and bandwidth

4、Query the license of Node B and RNC
Node B LMT：DSP LICENSE
RNC LMT：DSP LICENSE（both BAM and SPU）
5、UE log Tracing（PROBE or QXDM）
6、Export Configuration File of RNC and Main Board log of Node B
Export the RNC inner Configuration file on RNC LMT(EXP INNERCFGMML) and Node B Main board log on the Node B LMT as follow after finished the tracing above