【資料名稱】：愛立信GPEH分析使用

【資料作者】：愛立信

【資料日期】：2011

【資料語言】：中文

【資料格式】：DOC

【資料目錄和簡介】：

Cause NameDisconnection Cause CodeDisconnection Cause Sub-CodeTriggerIdentity ParameterComments
Unspecified00Unspecified - all cases which will result in abnormal RAB disconnection and do not map to any of the ones described below.
Radio Connection Supervision (RCS)10"Other Radio Link Control (RLC) unrecoverable error.
" "This event will have all other (not max retransmission) possible Special purpose Processors RLC unrecoverable errors.
"
Radio Connection Supervision (RCS)11Radio Link Control (RLC) unrecoverable error in UTRAN (maximum number of RLC retransmissions is reached).
Radio Connection Supervision (RCS)12Radio Connection Supervision - expiry of timer (rcsAllRlLostTimer or rcsCchWaitCuTimer or hsDschRcLostT)
Radio Connection Supervision (RCS)13Radio link failure indication leading to a release with Cause = transport.
Radio Connection Supervision (RCS)14Radio link failure indication leading to a release with cause other than transport.
Congestion21Congestion action - release triggered by congestion.Cell Id
Transport30Transport network failure –All other CELLO_AAL2NCIFAILURE.
Transport31Transport network failure - CELLO_AAL2NCI_TEMP_FAILURE.
Transport32Transport network failure - CELLO_AAL2NCI_MANAGEMENT_INDUCED.
Transport33Transport network failure - CELLO_AAL2NCI_OTHER_DC_IND_CAU
O&M41Cell lock indication.Cell Id
Measurement control failure51MEASUREMENT CONTROL FAILURE that triggers a connection release - intra-frequency.
Measurement control failure52MEASUREMENT CONTROL FAILURE that triggers a connection release - inter-radio access technology.
Measurement control failure53MEASUREMENT CONTROL FAILURE that triggers a connection release - inter-frequency.
Measurement control failure54MEASUREMENT CONTROL FAILURE that triggers a connection release - traffic volume measurement set-up.
Soft Handover61Active Set Update complete message not received - addition.Scrambling Code of Radio Link to be added.
Soft Handover62Active Set Update complete message not received - deletion.Scrambling Code of Radio Link to be deleted.
Soft Handover63Active Set Update complete message not received - replacement.Scrambling Code of Radio Link to be replaced.
Soft Handover64Handover Evaluation release events - _EVENT_BUFFER_EXCEEDED.Scrambling Code of Radio Link to be added/ removed.
Soft Handover65Due to ReleaseConnOffset (for a cell not in the neighbour set).Scrambling Code of the cell.
Soft Handover66High Speed-Downlink Shared Channel (HS-DSCH) Cell Change failure after A-DCH removal.
Soft Handover60Other Handover Evaluation failure reasons: (_UNSPECIFIED_RELEASE_CAUSE, _BUFFER_TIME_EXCEEDED, _CELL_SYNC_INFO_NOTAVAILABLE)Scrambling Code of the cell.
Inter Radio Access Technology (IRAT)71IRAT outgoing failure - Timer T_reloc_overall expires.GSM cell Id
Inter Radio Access Technology (IRAT)72Cell change outgoing failure Timer T_cellchange expires.GSM cell Id
Inter-Frequency Handover (IFHO)81IFHO failure - reception of PHYSICAL CHANNEL RECONFIGURATION FAILURE with cause other than physical channel failure received from the UE on the source frequency.Target cell Id
Inter-Frequency Handover (IFHO)82IFHO failure - at expiry of timer Timer RRC T-PCR.Target cell Id
Inter-Frequency Handover (IFHO)83IFHO failure - if ciphering is ongoing, and if RBs mapped on TM-RLC entities have been established, and if a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message is received that does not include one or both of the IEs COUNT-C activation time and Uplink counter synchronization infoTarget cell Id
Channel Switching91Transition to a DCH connection has been initiated but can not be completed
High Speed Hard Handover101Selection of HS-DSCH connection, including a Hard HO has been initiated, but can not be completed
CN Hard Handover111timeRelocoverall (MO: Handover) expires.
CN Hard Handover112Relocation preparation procedure fails in source RNC due to either of the following:

RELOCATION PREPARATION FAILURE received

timeRelocPrep (MO: Handover) expires

ERROR INDICATION with procedure code "Relocation Preparation"

Iu User Plane Control121CN Triggered Initialisation Failure