【資料名稱】：TDD-LTE36331-8d0協(xié)議

【資料作者】：www

【資料日期】：2012-08-31

【資料語(yǔ)言】：中文

【資料格式】：其它

【資料目錄和簡(jiǎn)介】：

TDD-LTE36331-8d0協(xié)議
Contents
Foreword11
1Scope12
2References12
3Definitions, symbols and abbreviations14
3.1Definitions14
3.2Abbreviations14
4General16
4.1Introduction16
4.2Architecture16
4.2.1UE states and state transitions including inter RAT16
4.2.2Signalling radio bearers18
4.3Services19
4.3.1Services provided to upper layers19
4.3.2Services expected from lower layers19
4.4Functions19
5Procedures20
5.1General20
5.1.1Introduction20
5.1.2General requirements20
5.2System information21
5.2.1Introduction21
5.2.1.1General21
5.2.1.2Scheduling21
5.2.1.3System information validity and notification of changes21
5.2.1.4Indication of ETWS notification22
5.2.2System information acquisition23
5.2.2.1General23
5.2.2.2Initiation23
5.2.2.3System information required by the UE23
5.2.2.4System information acquisition by the UE23
5.2.2.5Essential system information missing24
5.2.2.6Actions upon reception of the MasterInformationBlock message25
5.2.2.7Actions upon reception of the SystemInformationBlockType1 message25
5.2.2.8Actions upon reception of SystemInformation messages25
5.2.2.9Actions upon reception of SystemInformationBlockType225
5.2.2.10Actions upon reception of SystemInformationBlockType326
5.2.2.11Actions upon reception of SystemInformationBlockType426
5.2.2.12Actions upon reception of SystemInformationBlockType526
5.2.2.13Actions upon reception of SystemInformationBlockType626
5.2.2.14Actions upon reception of SystemInformationBlockType726
5.2.2.15Actions upon reception of SystemInformationBlockType826
5.2.2.16Actions upon reception of SystemInformationBlockType927
5.2.2.17Actions upon reception of SystemInformationBlockType1027
5.2.2.18Actions upon reception of SystemInformationBlockType1127
5.2.3Acquisition of an SI message28
5.3Connection control28
5.3.1Introduction28
5.3.1.1RRC connection control28
5.3.1.2Security29
5.3.1.3Connected mode mobility29
5.3.2Paging30
5.3.2.1General30
5.3.2.2Initiation30
5.3.2.3Reception of the Paging message by the UE30
5.3.3RRC connection establishment31
5.3.3.1General31
5.3.3.2Initiation32
5.3.3.3Actions related to transmission of RRCConnectionRequest message34
5.3.3.4Reception of the RRCConnectionSetup by the UE34
5.3.3.5Cell re-selection while T300, T302, T303 or T305 is running35
5.3.3.6T300 expiry35
5.3.3.7T302, T303 or T305 expiry or stop36
5.3.3.8Reception of the RRCConnectionReject by the UE36
5.3.3.9Abortion of RRC connection establishment36
5.3.4Initial security activation37
5.3.4.1General37
5.3.4.2Initiation37
5.3.4.3Reception of the SecurityModeCommand by the UE37
5.3.5RRC connection reconfiguration38
5.3.5.1General38
5.3.5.2Initiation38
5.3.5.3Reception of an RRCConnectionReconfiguration not including the mobilityControlInfo by the UE39
5.3.5.4Reception of an RRCConnectionReconfiguration including the mobilityControlInfo by the UE (handover)39
5.3.5.5Reconfiguration failure41
5.3.5.6T304 expiry (handover failure)41
5.3.6Counter check42
5.3.6.1General42
5.3.6.2Initiation42
5.3.6.3Reception of the CounterCheck message by the UE42
5.3.7RRC connection re-establishment43
5.3.7.1General43
5.3.7.2Initiation43
5.3.7.3Actions following cell selection while T311 is running44
5.3.7.4Actions related to transmission of RRCConnectionReestablishmentRequest message44
5.3.7.5Reception of the RRCConnectionReestablishment by the UE45
5.3.7.6T311 expiry45
5.3.7.7T301 expiry or selected cell no longer suitable46
5.3.7.8Reception of RRCConnectionReestablishmentReject by the UE46
5.3.8RRC connection release46
5.3.8.1General46
5.3.8.2Initiation46
5.3.8.3Reception of the RRCConnectionRelease by the UE46
5.3.8.4T320 expiry47
5.3.9RRC connection release requested by upper layers47
5.3.9.1General47
5.3.9.2Initiation47
5.3.10Radio resource configuration47
5.3.10.0General47
5.3.10.1SRB addition/ modification48
5.3.10.2DRB release48
5.3.10.3DRB addition/ modification48
5.3.10.4MAC main reconfiguration49
5.3.10.5Semi-persistent scheduling reconfiguration49
5.3.10.6Physical channel reconfiguration49
5.3.11Radio link failure related actions49
5.3.11.1Detection of physical layer problems in RRC_CONNECTED49
5.3.11.2Recovery of physical layer problems49
5.3.11.3Detection of radio link failure50
5.3.12UE actions upon leaving RRC_CONNECTED50
5.3.13UE actions upon PUCCH/ SRS release request50
5.4Inter-RAT mobility50
5.4.1Introduction50
5.4.2Handover to E-UTRA51
5.4.2.1General51
5.4.2.2Initiation51
5.4.2.3Reception of the RRCConnectionReconfiguration by the UE51
5.4.2.4Reconfiguration failure52
5.4.2.5T304 expiry (handover to E-UTRA failure)52
5.4.3Mobility from E-UTRA53
5.4.3.1General53
5.4.3.2Initiation53
5.4.3.3Reception of the MobilityFromEUTRACommand by the UE53
5.4.3.4Successful completion of the mobility from E-UTRA54
5.4.3.5Mobility from E-UTRA failure54
5.4.4Handover from E-UTRA preparation request (CDMA2000)55
5.4.4.1General55
5.4.4.2Initiation55
5.4.4.3Reception of the HandoverFromEUTRAPreparationRequest by the UE55
5.4.5UL handover preparation transfer (CDMA2000)56
5.4.5.1General56
5.4.5.2Initiation56
5.4.5.3Actions related to transmission of the ULHandoverPreparationTransfer message56
5.4.5.4Failure to deliver the ULHandoverPreparationTransfer message56
5.4.6Inter-RAT cell change order to E-UTRAN56
5.4.6.1General56
5.4.6.2Initiation57
5.4.6.3UE fails to complete an inter-RAT cell change order57
5.5Measurements57
5.5.1Introduction57
5.5.2Measurement configuration59
5.5.2.1General59
5.5.2.2Measurement identity removal59
5.5.2.3Measurement identity addition/ modification60
5.5.2.4Measurement object removal60
5.5.2.5Measurement object addition/ modification61
5.5.2.6Reporting configuration removal61
5.5.2.7Reporting configuration addition/ modification62
5.5.2.8Quantity configuration62
5.5.2.9Measurement gap configuration62
5.5.3Performing measurements63
5.5.3.1General63
5.5.3.2Layer 3 filtering64
5.5.4Measurement report triggering64
5.5.4.1General64
5.5.4.2Event A1 (Serving becomes better than threshold)66
5.5.4.3Event A2 (Serving becomes worse than threshold)67
5.5.4.4Event A3 (Neighbour becomes offset better than serving)67
5.5.4.5Event A4 (Neighbour becomes better than threshold)68
5.5.4.6Event A5 (Serving becomes worse than threshold1 and neighbour becomes better than threshold2)68
5.5.4.7Event B1 (Inter RAT neighbour becomes better than threshold)69
5.5.4.8Event B2 (Serving becomes worse than threshold1 and inter RAT neighbour becomes better than threshold2)70
5.5.5Measurement reporting71
5.5.6Measurement related actions72
5.5.6.1Actions upon handover and re-establishment72
5.5.6.2Speed dependant scaling of measurement related parameters73
5.6Other73
5.6.1DL information transfer73
5.6.1.1General73
5.6.1.2Initiation74
5.6.1.3Reception of the DLInformationTransfer by the UE74
5.6.2UL information transfer74
5.6.2.1General74
5.6.2.2Initiation74
5.6.2.3Actions related to transmission of ULInformationTransfer message74
5.6.2.4Failure to deliver ULInformationTransfer message75
5.6.3UE capability transfer75
5.6.3.1General75
5.6.3.2Initiation75
5.6.3.3Reception of the UECapabilityEnquiry by the UE75
5.6.4CSFB to 1x Parameter transfer76
5.6.4.1General76
5.6.4.2Initiation76
5.6.4.3Actions related to transmission of CSFBParametersRequestCDMA2000 message76
5.6.4.4Reception of the CSFBParametersResponseCDMA2000 message76
5.7Generic error handling77
5.7.1General77
5.7.2ASN.1 violation or encoding error77
5.7.3Field set to a not comprehended value77
5.7.4Mandatory field missing77
5.7.5Not comprehended field78
6Protocol data units, formats and parameters (tabular & ASN.1)78
6.1General78
6.2RRC messages79
6.2.1General message structure79
–EUTRA-RRC-Definitions79
–BCCH-BCH-Message79
–BCCH-DL-SCH-Message79
–PCCH-Message80
–DL-CCCH-Message80
–DL-DCCH-Message80
–UL-CCCH-Message81
–UL-DCCH-Message81
6.2.2Message definitions82
–CounterCheck82
–CounterCheckResponse83
–CSFBParametersRequestCDMA200083
–CSFBParametersResponseCDMA200084
–DLInformationTransfer84
–HandoverFromEUTRAPreparationRequest (CDMA2000)85
–MasterInformationBlock85
–MeasurementReport86
–MobilityFromEUTRACommand87
–Paging88
–RRCConnectionReconfiguration89
–RRCConnectionReconfigurationComplete91
–RRCConnectionReestablishment91
–RRCConnectionReestablishmentComplete92
–RRCConnectionReestablishmentReject92
–RRCConnectionReestablishmentRequest93
–RRCConnectionReject93
–RRCConnectionRelease94
–RRCConnectionRequest96
–RRCConnectionSetup97
–RRCConnectionSetupComplete97
–SecurityModeCommand98
–SecurityModeComplete99
–SecurityModeFailure99
–SystemInformation99
–SystemInformationBlockType1100
–UECapabilityEnquiry102
–UECapabilityInformation102
–ULHandoverPreparationTransfer (CDMA2000)103
–ULInformationTransfer103
6.3RRC information elements104
6.3.1System information blocks104
–SystemInformationBlockType2104
–SystemInformationBlockType3106
–SystemInformationBlockType4107
–SystemInformationBlockType5108
–SystemInformationBlockType6109
–SystemInformationBlockType7110
–SystemInformationBlockType8111
–SystemInformationBlockType9113
–SystemInformationBlockType10113
–SystemInformationBlockType11114
6.3.2Radio resource control information elements115
–AntennaInfo115
–CQI-ReportConfig116
–DRB-Identity116
–LogicalChannelConfig117
–MAC-MainConfig117
–PDCP-Config119
–PDSCH-Config120
–PHICH-Config121
–PhysicalConfigDedicated121
–P-Max122
–PRACH-Config122
–PresenceAntennaPort1123
–PUCCH-Config123
–PUSCH-Config124
–RACH-ConfigCommon125
–RACH-ConfigDedicated126
–RadioResourceConfigCommon127
–RadioResourceConfigDedicated128
–RLC-Config129
–SchedulingRequestConfig131
–SoundingRS-UL-Config131
–SPS-Config132
–TDD-Config134
–TimeAlignmentTimer134
–TPC-PDCCH-Config134
–UplinkPowerControl135
6.3.3Security control information elements136
–NextHopChainingCount136
–SecurityAlgorithmConfig136
–ShortMAC-I137
6.3.4Mobility control information elements137
–AdditionalSpectrumEmission137
–ARFCN-ValueCDMA2000137
–ARFCN-ValueEUTRA137
–ARFCN-ValueGERAN138
–ARFCN-ValueUTRA138
–BandclassCDMA2000138
–BandIndicatorGERAN138
–CarrierFreqCDMA2000139
–CarrierFreqGERAN139
–CarrierFreqsGERAN139
–CDMA2000-Type140
–CellIdentity140
–CellIndexList140
–CellReselectionPriority141
–CSFB-RegistrationParam1XRTT141
–CellGlobalIdEUTRA142
–CellGlobalIdUTRA142
–CellGlobalIdGERAN143
–CellGlobalIdCDMA2000143
–MobilityControlInfo143
–MobilityParametersCDMA2000 (1xRTT)144
–MobilityStateParameters145
–PhysCellId145
–PhysCellIdRange145
–PhysCellIdCDMA2000146
–PhysCellIdGERAN146
–PhysCellIdentityUTRA-FDD146
–PhysCellIdUTRA-TDD146
–PLMN-Identity147
–PreRegistrationInfoHRPD147
–Q-RxLevMin148
–Q-OffsetRange148
–Q-OffsetRangeInterRAT148
–ReselectionThreshold149
–SpeedStateScaleFactors149
–SystemTimeInfoCDMA2000149
–TrackingAreaCode150
–T-Reselection150
6.3.5Measurement information elements150
–AllowedMeasBandwidth150
–Hysteresis150
–MeasConfig151
–MeasGapConfig152
–MeasId152
–MeasIdToAddModList153
–MeasObjectCDMA2000153
–MeasObjectEUTRA154
–MeasObjectGERAN155
–MeasObjectId155
–MeasObjectToAddModList155
–MeasObjectUTRA155
–MeasResults156
–QuantityConfig158
–ReportConfigEUTRA159
–ReportConfigId161
–ReportConfigInterRAT161
–ReportConfigToAddModList162
–ReportInterval163
–RSRP-Range163
–RSRQ-Range163
–TimeToTrigger164
6.3.6Other information elements164
–C-RNTI164
–DedicatedInfoCDMA2000164
–DedicatedInfoNAS164
–FilterCoefficient164
–MMEC165
–NeighCellConfig165
–RAND-CDMA2000 (1xRTT)165
–RAT-Type166
–RRC-TransactionIdentifier166
–S-TMSI166
–UE-CapabilityRAT-ContainerList166
–UE-EUTRA-Capability167
–UE-TimersAndConstants170
6.4RRC multiplicity and type constraint values171
–Multiplicity and type constraint definitions171
–End of EUTRA-RRC-Definitions171
7Variables and constants172
7.1UE variables172
–EUTRA-UE-Variables172
–VarMeasConfig172
–VarMeasReportList173
–VarShortMAC-Input173
–Multiplicity and type constraint definitions173
–End of EUTRA-UE-Variables173
7.2Counters174
7.3Timers (Informative)175
7.4Constants176
8Protocol data unit abstract syntax176
8.1General176
8.2Structure of encoded RRC messages176
8.3Basic production176
8.4Extension176
8.5Padding177
9Specified and default radio configurations177
9.1Specified configurations177
9.1.1Logical channel configurations177
9.1.1.1BCCH configuration177
9.1.1.2CCCH configuration178
9.1.1.3PCCH configuration178
9.1.2SRB configurations178
9.1.2.1SRB1178
9.1.2.2SRB2178
9.2Default radio configurations178
9.2.1SRB configurations178
9.2.1.1SRB1178
9.2.1.2SRB2179
9.2.2Default MAC main configuration179
9.2.3Default semi-persistent scheduling configuration179
9.2.4Default physical channel configuration179
9.2.5Default values timers and constants180
10Radio information related interactions between network nodes180
10.1General180
10.2Inter-node RRC messages181
10.2.1General181
–EUTRA-InterNodeDefinitions181
10.2.2Message definitions181
–HandoverCommand181
–HandoverPreparationInformation182
–UERadioAccessCapabilityInformation182
10.3Inter-node RRC information element definitions183
–AS-Config183
–AS-Context184
–ReestablishmentInfo184
–RRM-Config185
10.4Inter-node RRC multiplicity and type constraint values185
–Multiplicity and type constraints definitions185
–End of EUTRA-InterNodeDefinitions186
10.5Mandatory information in AS-Config186
11UE capability related constraints and performance requirements188
11.1UE capability related constraints188
11.2Processing delay requirements for RRC procedures189
Annex A (informative):Guidelines, mainly on use of ASN.1190
A.1Introduction190
A.2Procedural specification191
A.2.1General principles191
A.2.2More detailed aspects191
A.3PDU specification191
A.3.1General principles191
A.3.1.1ASN.1 sections191
A.3.1.2ASN.1 identifier naming conventions192
A.3.1.3Text references using ASN.1 identifiers193
A.3.2High-level message structure193
A.3.3Message definition194
A.3.4Information elements195
A.3.5Fields with optional presence196
A.3.6Fields with conditional presence197
A.3.7Guidelines on use of lists with elements of SEQUENCE type197
A.4Extension of the PDU specifications198
A.4.1General principles to ensure compatibility198
A.4.2Critical extension of messages198
A.4.3Non-critical extension of messages199
A.4.3.1General principles199
A.4.3.2Further guidelines200
A.4.3.3Typical example of evolution of IE with local extensions201
A.4.3.4Typical examples of non critical extension at the end of a message202
A.4.3.5Examples of non-critical extensions not placed at the default extension location202
–ParentIE-WithEM202
–ChildIE1-WithoutEM203
–ChildIE2-WithoutEM204
A.5Guidelines regarding inclusion of transaction identifiers in RRC messages204
A.6Protection of RRC messages (informative)204
A.7Miscellaneous205
Annex B (normative):Release 8 AS feature handling206
B.1Feature group indicators206
B.2CSG support209
Annex C (informative):Change history210