【資料名稱】：愛立信不同設備功率配置
【資料作者】：x
【資料日期】：x
【資料語言】：英文
【資料格式】：DOC
【資料目錄和簡介】：
愛立信不同設備功率配置

BSPWRB
Type:Numeral
Range:0 to 63
Unit:dBm
Default:-
Command:RLCPC, RLCPP
O&M:In some cases it is possible to set this parameter to a non-valid value (as described in the comment below). Then, the activation of the channel group might not be able to perform correctly.
Comments:Base Station output power in dBm for the BCCH RF channel number.

The BTS can transmit with different power levels on the frequency that carries the BCCH and on the frequencies that do not carry it. The power is specified at the Power Amplifier (PA) output, that is immediately after the transmitter unit and before the combiner.
For RBS 2101/2102/2103/2106/2107/2202/2206/2207/2216 and RBS 6000 DUG/RUG the following is valid:
GSM 800:35 to 47, 49(1), 51(2) dBm, odd values only

GSM 900:35 to 47, 49 (1), 51 (2) dBm, odd values only

GSM 1800:33 to 45, 47 (1), 49 (2) dBm, odd values only

GSM 1900:33 to 45, 47 (1), 49 (2) dBm, odd values only.

(3)

For RBS 2109 the following is valid:
GSM 800:31 to 43, 45 (1) dBm, odd values only

GSM 900:31 to 43, 45 (1) dBm, odd values only

GSM 180029 to 41, 43 (1) dBm, odd values only.

GSM 1900:29 to 41, 43 (1) dBm, odd values only.

For RBS 2111 the following is valid:
GSM 900:31 to 43, 45 (1), 47 dBm, odd values only

GSM 1800:31 to 43, 45 (1), 47 dBm, odd values only

For RBS 2309 the following is valid:
GSM 900:25 to 37, 39 (1) dBm, odd values only

GSM 1800:25 to 37, 39 (1) dBm, odd values only

For RBS 2301/2302/2308 the following is valid:
GSM 800 (2308 only):21 to 33, 35 (1) dBm, odd values only

GSM 900:21 to 33, 35 (1) dBm, odd values only

GSM 1800:21 to 33, 35 (1) dBm, odd values only

GSM 1900:21 to 33, 35 (1) dBm, odd values only.

For RBS 2401 indoor the following is valid:
GSM 900:7 to 19 dBm, odd values only
GSM 1800:9 to 21 dBm, odd values only
GSM 1900:9 to 21 dBm, odd values only.
For RBS 2409 the following is valid:
GSM 1800:11 to 23 dBm, odd values only(4)

GSM 1900:11 to 23 dBm, odd values only (4)

For RBS 6000 DUG/RUS, GSM 800/900/1800/1900, the following is valid in backward compatible mode Abis O&M version G12R12(both odd and even values):
Maximum power per MCPANumber of TRXs in one MCPA:
123468
50 dBm---32 to 44 dBm30 to 42 dBm29 to 41 dBm
49 dBm---31 to 43 dBm30 to 42 dBm28 to 40 dBm
48 dBm36 to 48 dBm33 to 45 dBm31 to 43 dBm30 to 42 dBm--
46 dBm-31 to 43 dBm----
43 dBm31 to 43 dBm-----
For RBS 6000 DUG/RUS, the following is valid for Abis O&M version G12R13:
GSM 800/900/1800/1900:20 to 50dBm, odd and even values

(1)Software Power Boost (not applicable for RBS 2401 and RBS 6000 DUG/RUS): The feature Software Power Boost is activated by setting BSPWRB to a special value that is 2 dB higher than the maximum possible power at the PA output. TX diversity is used and each TX supporting the master-slave configuration is configured. A BTS with filter combiner does not support Software Power Boost.
(2)Transmitter Coherent Combining: The feature Transmitter Coherent Combining (TCC) is activated by setting BSPWRB to a special value that is 4 dB higher than the maximum possible power at the PA output. TCC is applicable to RBS 2106, 2107, 2206, 2207 and 2216 only.
(3)For GSM 900 - TRU: KRC 131 47/01, the range is 31 to 43 dBm. If one or more GSM TRU type KRC 131 47/01 is used within one cell the maximum output power for that cell shall be limited to 43 dBm. To ensure that, the parameter MPWR (see MPWR) shall be set to 43 dBm for all TXs on that cell.
(4)SWPB and TCC are not applicable

[ 本帖最后由 laomaoyixin 于 2013-6-22 08:36 編輯 ]